News

Your present location:Home -> Technical Support -> Maintenance -> Feed machinery roughly this several parts

Font Size:big  middle  small

Feed machinery roughly this several parts

Number of visits: Date:2016-9-9 04:40

1、Base: play the role of the connecting parts and bearing mill, make them form a whole. Shredded material is being exhausted from the base.
2、Rotor: the main shaft, hammer frame plate, pin shaft, bearings and other parts, hammer, is the main moving parts of crusher. Rotor speed is higher, assembled on without pin and hammer into the dynamic balance test.
3、Operate the door: replace the sieve plate or hammer to open door operation. Crusher work by locks lock door operation, ensure the operation of rotor rotating door can't open on its own.
4、On the chassis: upper feeding mouth, lower connection with base, sieve plate on both sides respectively equipped, and the rotor of the crushing chamber, the material in crushing chamber to smash.
5、Feeding guide mechanism: make the material from the left or right into the crushing chamber. Feeding guide plate of the reversing manual control to ensure the feed direction consistent with the rotor turning.
6、Pressure screen structure: the locking device connected, ensure that screen piece fixed on the shredder.
7、Sieve sieve beam: sieve beam and pressure institutions together to screen piece fixed on the shredder.
Production of feed mill adopts double rotor structure, greatly improve the working efficiency.
 

TypeInfo: Maintenance

Keywords for the information: